Lyophilization equipment for flowers
Do I need a special lyophilization equipment for flowers? Yes, flower lyophilization is different from other products. Just because the flowers are loose and blooming, so it is empty inside the flowers. The empty body is a block for thermal transfer including both freezing and heating. The heat transfer of traditional lyophilizers are through contacting area. If there are more contacting area, it will be more efficient for heat transfer. It is obviously that the blooming flowers have little contacting area with trays or heating plates, that’s why it takes more than 10 days for one batch of flowers lyophilization.
To solve this problem, Kemolo designed the special lyophilization equipment for flowers. The heat transfer is not replying on contacting area, but through the space in the whole lyophilization chamber. Thus, all flowers are easily frozen and easily heated in the space, and much more even freezing and heating. So, the lyophilized flowers are in super high quality.
Specification
Model | FD-20 |
Shelf area | 2.08m2 |
Capacity (Φ60mm, stem<50mm) | 400 flowers |
Capacity (Φ50mm, stem<50mm) | 600 flowers |
Capacity (Φ40mm, stem<50mm) | 1000 flowers |
Capacity (Φ30mm, stem<50mm) | 1600 flowers or 20kg |
Capacity (Φ20mm, stem<50mm) | 3500 flowers or 20kg |
Capacity (Φ10mm, stem<50mm) | 12000 flowers or 20kg |
Drying chamber material | Stainless steel SUS304 |
Drying chamber strength | -0.1Mpa |
Shelf quantity and material | 5 layers; FDA certified AL-6063-T5 |
Shelf size (mm) | 600*700mm |
Shelf spacing | 60-80mm |
The diameter of hole | 10mm (can be customized) |
Product Freezing | In the machine |
Freezing temperature | -30℃ |
The shape of vapor condenser | Round tube |
Vapor condenser temperature | -40℃ |
Refrigeration system | Cooling both flowers and vapor condenser |
Refrigeration compressor | Low temperature compressor |
Refrigerant | R404A |
Cooling way | By air cooling |
Vacuum pump | Double stage rotary vane vacuum pump |
Ultimate vacuum level (Pa) | 10 Pa (non-load) |
Working vacuum level (Pa) | <100pa |
Installed power | 3.5kw, 200-480V, 3P, 50/60Hz |
Defrost way | By water |
Control system | PLC with HMI; Manual control |
Installation area (m2) | 2 m2 |
Estimated dimension | 1800*1100*2000mm (L*W*H) |
Estimated Weight (kg) | 1200kg |
You will get a quick reply, except weekend and holiday
